Home »
Extenders »
Video/Audio Extenders »
4K 18Gbps HDMI Extender via One LC Singlemode or Multimode Fiber Optic Cable

4K 18Gbps HDMI Extender via One LC Singlemode or Multimode Fiber Optic Cable

NTI Part #: ST-FO4K18GB-RS-LC-Group

XTENDEX® ST-FO4K18GB-RS-LC (Local and Remote Unit)

Additional Images

NTI Part #: ST-FO4K18GB-RS-LC-Group

The XTENDEX® 4K 18Gbps HDMI Extender via Fiber Optic Cable locates an Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI display, IR and RS232 up to 3,280 feet (1,000 meters) away from a 4K HDMI source using a single LC singlemode fiber optic strand and 984 feet (300 meters) using multimode fiber optic cable. Each extender consists of a transmitter that connects to an HDMI source, and a receiver that connects to an HDMI display.

Resolutions to Ultra-HD 4Kx2K 60Hz 4:4:4
18Gbps bandwidth
HDMI 2.0
IR, RS232 control

ROHS Compliant 4K 18Gbps HDMI Extender via One LC Singlemode or Multimode Fiber Optic Cable
CE Compliant 4K 18Gbps HDMI Extender via One LC Singlemode or Multimode Fiber Optic Cable
FCC Compliant 4K 18Gbps HDMI Extender via One LC Singlemode or Multimode Fiber Optic Cable

Scroll Down to Get Quote

Signal transmission via single-strand singlemode or multimode LC fiber optic cable.
- Using singlemode 9-micron cable, extend to 3,280 feet (1,000 meters).
- Using multimode 50-micron cable, extend to 984 feet (300 meters).
Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @30/50/60Hz YUV 4:4:4, and HDTV resolutions to 1080p @120Hz.
HDMI features supported:
- HDMI 2.0
- 8-bit, 10-bit, and 12-bit Deep Color
- Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, Dolby Digital+, Dolby Atmos, LPCM 2/5.1/7.1CH, DTS 5.1, and DTS:X
- YUV 4:4:4, 4:2:2, and RGB
- Bandwidth up to 600 Mhz (18Gbps)
- 3D (1080p @60Hz)
HDCP 2.2 and 1.4 compliant.
Bi-directional IR control from input and output locations.
Support full-duplex RS232 up to 115200 baud.
Plug-and-play functionality - no software needed.
Low RFI/EMI for sensitive applications.
Cables can be installed in conduit prior to extender installation.
Integrated mounting brackets for easy surface/wall mounting.

Local Unit

One female HDMI connector for source.
Two female 3.5mm ports for connecting an IR emitter and receiver (included).
- IR frequency: 20KHz to 60KHz
3-pin screw terminal for RS232.
- Support full-duplex RS232 up to 115200 baud.
One simplex female LC fiber optic port for sending video/audio, IR, and RS232 signals.
Female 5-pin USB Mini Type B connector for firmware updates.
Supports HDCP 2.2 and 1.4

Remote Unit

One female HDMI connector for display.
Two female 3.5mm ports for connecting an IR emitter and receiver (included).
- IR frequency: 20KHz to 60KHz
3-pin screw terminal for RS232.
- Support full-duplex RS232 up to 115200 baud.
One simplex female LC fiber optic port for sending video/audio, IR, and RS232 signals.
Female 5-pin USB Mini Type B connector for firmware updates.
Supported video resolutions:
- Ultra-HD 4Kx2K60Hz 4:4:4 resolutions (4096x2160 and 3840x2160 @30/50/60Hz)
- HDTV resolutions to 1080p (1080p@120Hz, 1080p 3D@60Hz).
Supports HDCP 2.2 and 1.4
Max data rate: 18Gbps

Power

Local and remote unit: 100 to 240 VAC at 50 or 60Hz via AC adapter.
Input voltage: 5VDC
Power consumption: 3W each.

Environmental

Operating temperature: 32 to 104°F (0 to 40°C).
Storage temperature: -4 to 140°F (-20 to 60°C).
Operating and storage relative humidity: 20 to 90% non-condensing RH.

Dimensions

WxDxH (in): 6.26x2.64x0.7 (159x67x17.78 mm)

Regulatory Approvals

CE, FCC, RoHS

Warranty

Two years

Max Distance

3,280 feet (1,000 meters) over singlemode 9/125-micron LC simplex fiber optic cable.
984 feet (300 meters) over multimode 50/125-micron OM3 LC simplex fiber optic cable.

Cables

Interface cables between the video source/display and the transmitter/receiver are required for proper operation.
- Supports cable lengths to 20 feet.
- Cables longer than 20 feet can be used provided they have a built-in video equalizer (also known as "active HDMI cables").
Use HD-xx-MM cable to connect an HDMI source or display (not included).
Use DVI-HD-xx-MM cable to connect a DVI source or display (not included).
Use HD-RM-xx-MM 4K HDMI RedMere Active Cables to connect an HDMI source or display up to 100 feet.
- Supports resolutions to 4K@30Hz.
Use a simplex LC singlemode 9/125-micron fiber optic cable to extend the receiver from the transmitter up to 3,280 feet (1,000 meters).
Use a simplex LC multimode 50/125-micron OM3 fiber optic cable to extend the receiver from the transmitter up to 984 feet (300 meters).
Cables not included.

Package Includes

One transmitter unit
One receiver unit
One fiber transmitter module
One fiber receiver module
Two IR emitters
Two IR receivers
Two power supplies
Two screw terminal pairs for RS232
User manual

Application Drawings

4K 18Gbps HDMI Extender via One LC Singlemode or Multimode Fiber Optic Cable

How to extend an Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI display up to 3,280 feet (1,000 meters)

Data Sheet:

4K 18Gbps HDMI Extender via One LC Singlemode or Multimode Fiber Optic Cable 200 KB

User Manual:

ST-FO4K18GB-RS-LC – Installation and Operation Manual 509 KB

(0)4K 18Gbps HDMI Extender via One LC Singlemode or Multimode Fiber Optic Cable

NTI Part #	Description	Qty
ST-FO4K18GB-RS-LC	4K 18Gbps HDMI Extender via One LC Singlemode or Multimode Fiber Optic Cable

Collapse all Expand all Related Items :

(0)HDMI Male-Male Cables

NTI Part #	Length	Qty
HD-3-MM	3 feet
HD-6-MM	6 feet
HD-10-MM	10 feet
HD-15-MM	15 feet
HD-20-MM	20 feet

(0)HDMI RedMere Active Cable, Male to Male, Built-In Signal Booster

NTI Part #	Length	Qty
HD-RM-20-MM	20 feet
HD-RM-30-MM	30 feet
HD-RM-40-MM	40 feet
HD-RM-50-MM	50 feet

(0)DVI-D Male to HDMI-A Male Single Link Cable

NTI Part #	Length	Qty
DVI-HD-1M-MM	1 meter
DVI-HD-2M-MM	2 meters
DVI-HD-3M-MM	3 meters
DVI-HD-5M-MM	5 meters

Top Please enter a quantity of at least one product