VGA Video/Audio Matrix Switch via CAT5 Audio Video Routing Switch, VGA video switcher RJ45 UTP Multiple Computer Monitor Router

Audio/Video Matrix Switch with Direct VGA In & CAT5 Out

NTI Part #: SM-8X8-C5AVR-LCD-Group
VEEMUX® SM-16X16-C5AVR-LCD (Front & Back)
VEEMUX® SM-16X16-C5AVR-LCD (Front & Back)
NTI Part #: SM-8X8-C5AVR-LCD-Group
The VEEMUX® Audio/Video Matrix Switch with Direct-Connect VGA Inputs and CAT5 RJ45 Outputs routes audio/video signals from many computers to multiple displays (projectors, LCD/plasma monitors, etc.) and speakers. It is capable of connecting to as many as 16 video sources directly and 16 video displays via receivers with a maximum extension of 600 feet (183 meters) from the switch using CAT5/5e/6 cable.
Also known as: VEEMUX® VGA router, audio / video matrix switch via CAT5, video router, routing switcher, video switch, video port router, matrix switch, audio/video switch, video matrices
  • Designed and Manufactured in the U.S.A.
  • Audio/Video Matrix Switch with Direct VGA In & CAT5 OutDigital Signage Product
Scroll Down to Get Quote
The VEEMUX® Audio/Video Matrix Switch with Direct-Connect VGA Inputs and CAT5 RJ45 Outputs routes audio/video signals from many computers to multiple displays (projectors, LCD/plasma monitors, etc.) and speakers. It is capable of connecting to as many as 16 video sources directly and 16 video displays via receivers with a maximum extension of 600 feet from the switch using CAT5/5e/6 cable.

A single audio/video output can be routed to one or more destinations. Each image will be as crisp and clear as if directly connect to the original source. Buffered video outputs and digital transmission of audio signals ensures integrity is maintained throughout the system.
  • Configure and control the switch through Ethernet, serial port or front panel buttons.
  • Matrix Control Software with Graphical User Interface (GUI control) is included with the product.
  • Supports video resolutions to 1920x1440.
  • Each input can be independently connected to any or all outputs.
  • Inputs and outputs can be named.
  • Each output provides one video signal and one stereo audio signal.
  • Video quality adjustment is done automatically at every connection change, or can be forced via the front panel or web interface.
  • No loss of audio or video quality between the switch and remote units.
  • Cabling runs are simplified with NTI's high density A/V switch cables.

VEEMUX SM-nXm-C5AVR-LCD

  • Female 15-pin HD input connectors.
  • Female RJ45 output connectors.
  • Bandwidth: 175 MHz, fully loaded.
  • 10/100BaseT Ethernet interface.
  • Supported protocols: HTTP, HTTPS, Telnet
  • RS232 interface.
Dimensions
  • WxDxH: 19x12x3.5 in (483x305x89 mm)
Power
  • 110 or 220 VAC at 50 or 60 Hz via IEC connector.
Cables
  • Interface cables between your computers and the switch are required for proper operation.
    • Use VEXT-xx-MM to connect VGA video from the computers to the switch.
    • Use HDAVEXT-xx-MM to connect VGA video and stereo audio from the computers to the switch.
  • Use CAT5, CAT5e or CAT6 solid straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors.
  • Cables not included
Environmental
  • Operating temperature: 32 to 100°F (0 to 38°C).
  • Storage temperature: -20 to 140°F (-30 to 60°C).
  • Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory Approvals
  • CE, RoHS
Warranty
  • Two years

Remote Unit (Receiver)

Video Output
  • Female 15-pin HD connector.
  • Supports resolutions up to 1920x1440; refer to the resolution chart below for resolutions at different lengths.
  • Output impedance: 75 Ohms.
  • Maximum output level for video: 1.45Vp-p.
  • Video quality adjustment for different lengths of CAT5/5e/6 cable is done manually for video-only units and automatically for audio/video units.
Optional Audio
  • 3.5 mm stereo audio jack.
  • Frequency response: 20 Hz to 20 kHz, ±.5dB.
  • Signal-to-Noise Ratio (SNR): >72 dBA.
  • Total Harmonic Distortion and Noise (THD+N): <0.06%.
  • Stereo crosstalk: -70 dB.
  • Maximum output levels: 3.1Vp-p (line level).
  • Line level output; supports multimedia speakers.
    • CD quality audio output.
Dimensions
  • WxDxH: 3.5x3.1x1.2 in (89x79x30 mm)
Power
  • 110 or 220 VAC at 50 or 60 Hz via AC adapter.
Environmental
  • Operating temperature: 32 to 100°F (0 to 38°C).
  • Storage temperature: -20 to 140°F (-30 to 60°C).
  • Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory Approvals
  • CE, RoHS
Warranty
  • Two years

Cable Distances and Resolutions

Distances and Resolutions for CAT5/CAT5e and CAT6 Cables
Cable Distance Maximum Resolution
CAT5/CAT5e 600 feet (183 meters) 1024x768 at 60 Hz
400 feet (122 meters) 1280x1024 at 60 Hz
300 feet (91 meters) 1600x1200 at 60 Hz
100 feet (30 meters) 1920x1440 at 60 Hz
CAT6 300 feet (91 meters) 1024x768 at 60 Hz
200 feet (61 meters) 1280x1024 at 60 Hz
100 feet (30 meters) 1920x1440 at 60 Hz
Front Panel Interface
  • Liquid Crystal Display (LCD) can display all current connections.
  • Locally change input and output selections with front panel buttons.
  • Digital VU-Meter displays audio levels for the currently selected port.
  • Configuration and control can be done using the front panel buttons.
  • Main menu allows the user to:
    • Set serial address.
    • Set serial speed.
    • Set IP address.
    • Set Subnet Mask.
    • Adjust contrast.
    • Force compensation.
    • Show size.
RS232 Control
  • Configuration and control can be done through the serial port.
  • Control the switch using the NTI Switch Control Program with Graphical User Interface (GUI control) via RS232.
  • Selectable baud rate: 1200 through 9600.
    • Baud rate is set via the main menu, serial command, telnet or web page.
Commands
  • CS -causes one INx/OUTx connection to occur.
  • CA -causes all inputs to connect to specified output.
  • RO -reads what input is connected to specified output.
  • CC -save matrix.
  • RC -recall matrix.
  • CB -change baud rate.
  • RV -version information.
  • RU -reads size of matrix, reports number of inputs and number of outputs on specified switch.
  • EA -set the IP address.
  • EM -set the IP mask.
  • EG -set the default gateway.
  • ET -set the webserver timeout.
Ethernet Control
  • Configuration can be done over the Internet via web page or telnet.
Web Server (view product demo)
  • Security is ensured by password and user configurable timeout.
  • Up to 25 users can access the web page at one time.
  • The user can access the following pages:
    • Switch page : allows the user to connect any input to any output, save and recall up to ten connections.
    • Administration pages : administrator can access setup pages, port setting page and update firmware page. Assign names to video and audio inputs and outputs.
    • Password page : allows the user to change the password for accessing the web interface.
    • Help page : documentation on the usage of the web interface.
    • Update Web Server page : globally update the web server to any settings that have been changed.
    • Logout page : view currently active connections and logout of the web interface.
Telnet
  • Security is ensured by password.
  • Commands are similar to RS232 commands.
  • The telnet server listens on ports 2000 and 2005.
    • Port 2000 is for an operator telnet session.
    • Port 2005 is intended for a software control type session.

Application Drawings

  • VEEMUX Audio/Video Matrix Switch with Direct VGA in and CAT5 out
    VEEMUX Audio/Video Matrix Switch with Direct VGA in and CAT5 out
User Manual:
Data Sheet:
Knowledge Base:

(0)Audio/Video Matrix Switch with Direct VGA In & CAT5 Out

NTI Part # Inputs Outputs Rack Units Dimensions WxDxH (in.) Qty
SM-8X8-C5AVR-LCD 8 8 2RU 19x12x3.5
SM-8X16-C5AVR-LCD 8 16 2RU 19x12x3.5
SM-16X8-C5AVR-LCD 16 8 2RU 19x12x3.5
SM-16X16-C5AVR-LCD 16 16 2RU 19x12x3.5

(0)Receivers to 600 Feet

NTI Part # Supported Features Local or Remote Rackmount or Desktop Number of Ports Dimensions WxDxH (in.) Qty
ST-C5V-R-600 VGA Video Remote Desktop Unit 1 3.5x3.1x1.2
ST-C5VA-R-600 VGA Video, Audio Remote Desktop Unit 1 3.5x3.1x1.2

Collapse all Expand all Related Items :

(0)VGA Video Cables, Male to Male

NTI Part # Length Color Description Qty
VEXT-1-5-MM 1.5 feet Black No Ferrite
VEXT-3-MM 3 feet Black 2 Molded in Ferrite Cores
VEXT-6-MM 6 feet White No Ferrite
VEXT-10-MM 10 feet White No Ferrite
VEXT-15-MM 15 feet Black 2 Molded in Ferrite Cores
VEXT-25-MM 25 feet Black 2 Molded in Ferrite Cores
VEXT-35-MM 35 feet White No Ferrite
VEXT-50-MM 50 feet Black 2 Molded in Ferrite Cores
VEXT-75-MM 75 feet Black 2 Molded in Ferrite Cores
VEXT-100-MM 100 feet Black 2 Molded in Ferrite Cores

(0)Male 15-pin HD to Male 15-pin HD + Male 3.5mm Interface Cable

NTI Part # Length Qty
HDAVEXT-25-MM 25 feet
HDAVEXT-3-MM 3 feet
HDAVEXT-6-MM 6 feet
HDAVEXT-10-MM 10 feet
HDAVEXT-15-MM 15 feet
Top Please enter a quantity of at least one product
  • Primalcom Enterprises
    • 21-3 Jalan Tiara 3,
    • Bandar Baru Klang,
    • Klang, Selangor 41150,
    • Malaysia
  • Telephone: 603-3343 1708/9
  • Fax: 603-3343 1711
  • Contact: Sales
  • Web: www.primalcom.com

Contact Us

© 2013 Network Technologies Inc. All Rights Reserved