Environment Monitoring System IP Temp CAT5 Video Extender HDMI VGA DVI KVM Switch, Video Splitter, Video Matrix Switch
ENVIROMUX-IPCAM-NPOE
ENVIROMUX-IPCAM-NPOE

Wired Day/Night PTZ IP Camera with Power over Ethernet (PoE)

NTI Part #: ENVIROMUX-IPCAM-NPOE
View and control the camera from the ENVIROMUX web interface, the camera web interface, included software, or with a compatible cell phone. A triggered snapshot can be forwarded in alert e-mails.
  • View the camera from the ENVIROMUX web interface, camera web interface, included software, or with a compatible cell phone.
    • Control the camera using the camera web interface accessible from the ENVIROMUX web interface.
  • With the ENVIROMUX-2D/5D/16D and ENVIROMUX-MINI-LXO, a triggered snapshot can be forwarded in alert e-mails or stored locally on a connected flash drive.
    • A snapshot can be triggered by any programmed event (motion detection, door open/close, glass break, smoke, liquid detection, etc.)
  • Two-way Audio with built-in microphone and 3.5mm stereo audio output.
  • IR night vision supports up to 25 ft (7.5 m).
  • 1/4" CMOS sensor with 4x digital zoom.
  • Video streaming: H.264, MJPEG, and JPEG.
  • Frame rate: 30 fps at up to 720p
  • Lens: F2.0, 4.6 mm (0.18 in).
  • Pan and tilt:
    • Pan: 330°
    • Tilt: 115°
    • Auto-patrol preset positions: 10.
  • 10/100 Mbps Auto-MDIX Ethernet port for data and power connections.
    • Supports Power over Ethernet (PoE) – power supply not required.
    • Power consumption: 10.5W.
  • Micro SD memory card slot.
  • Requires Windows 8.1, 8, 7, Vista, XP or Windows Server 2003, 2008 for initial installation.
  • Operating temperature: 32 to 104°F (0 to 40°C).
  • Operating humidity: 0 to 90% non-condensing RH.
  • Dimensions WxDxH: 3.9x3.9x5.0 in (100x100x128 mm).
  • Compatible with ENVIROMUX-2D/5D/16D, ENVIROMUX-MINI-LXO, ENVIROMUX-MICRO, and ENVIROMUX-1W.
  • Mounting base and mounting hardware included.
  • Regulatory approvals: CE, FCC, RoHS.