Environment Monitoring System IP Temp CAT5 Video Extender HDMI VGA DVI KVM Switch, Video Splitter, Video Matrix Switch
ENVIROMUX-TDS
ENVIROMUX-TDS

Tamper Switch

NTI Part #: ENVIROMUX-TDS
Tamper switch for drawers and alarm boxes. Sends activation signal when tamper switch is released.
  • Tamper switch for drawers and alarm boxes.
  • Sends activation signal when tamper switch is released.
  • Silver-plated contacts ensure reliable long-term operation.
  • High-impact white plastic case, screw terminals.
  • Screw terminal
    • Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
      • To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
      • To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
  • Maximum cable length: 1,000 ft (305 m).
  • Normally-open contacts at rest, closed contacts when depressed.
  • Operating temperature: -13 to 158°F (-25 to 70°C ).
  • Dimensions (WxDxH): 2.74x1.12x0.63 in (70x28x16 mm),
Downloads & References